BC 2004 06 24 - Laserfiche WebLink

Home Browse Search

June 24, 2004 Page 539 The Title Block - shall contain the following information: subdivision name, property designation, name(s) and address(es) of owner(s), township, county, state, the date(s) the survey was made, name and date of Preliminary Plat approval, scale in feet per inch in words or figures and bar graph, and the name, seal, address, and phone number of the surveyor. The Title Block shall be located on the bottom right hand corner of the plat. Monuments and Control Corners - the accurate location, material, and size of monuments and the designation of specific control corners in conformance with G.S. 39-32 as amended shall be shown. 3 o Boundaries and Uses - the exact boundary of the tract of land being subdivided in heavy lines; including full dimensions by lengths and bearings. The plat shall clearly show the disposition of all portions of the tract into designated lots, roads, alleys, parks, floodplains, and open space and the name(s) or owner(s) of record of adjoining parcels of unsubdivided land and present zoning. Acreage - each plat shall show the total acreage of the areas being recorded along with the area of each lot. Area of land parcels must show the method of computation used by the surveyor, and county parcel identification numbers. 5o Sufficient Data - to determine readily and reproduce accurately on the ground the location, bearing, and length of every street line, lot line, easement line, block line, building line whether straight or curved. This data shall include tangent distance, the central angle, the radius, arcs and chords of all curves. All linear dimensions shall be given in feet and hundredths thereof and angular dimensions shall be of comparable accuracy within the limits of good surveying practices. If the Final Plat is Drawn in Two or More Sections - each section shall be accompanied by a key map showing the location of the sections, match lines shall be shown and labeled, and maps shall have reference to each other (i.e. map 1 of 2, map 2 of 2, etc.). 7. Vicinity Map - as shown on preliminary plat. 8. North Arrow - north arrow and declination. Restrictive Covenants where restrictive covenants are proposed reference shall be made on the final plat as to deed book and page number of recorded covenants, or space shall be provided to insert the deed book and page number if the covenants have not been recorded. 10. Road Maintenance statement as to who will maintain the roads and drainage systems until such time when they may be turned over to the proper governmental agency for their maintenance. Deed Book and Page Number must be shown if a road maintenance agreement has been recorded for that purpose. 11. Lot Area Reservation - If public water and sewer is not currently available to the subdivision, but will be extended to that area, then the subdivider may indicate on the face of the final plat that the lots may be further divided, as permitted by zoning when water and sewer is available to the site. 12. Location of Floodplain/River-Stream Buffer Overlay - subdivider shall show location of one hundred (100) year flood elevation and location of buffer strip as required by the River/Stream Overlay. 13. 14. Final plat requirements - all final inspections by the public service providers must be complete and fees must be paid before the Subdivision Administrator will sign the Certificate of Approval by the Subdivision Administrator. Certificate number (6) as follows in Section C must be affixed to all final plats where public utility services are provided by the City of Concord. ~ Site Triangle Easements Dedicated sight triangle easements at intersections with public streets will need to be shown on the final plat. The County standard is 35' x 35' and NCDOT is 10' x 70'.