AG 2015 08 17 - Laserfiche WebLink

Home Browse Search

PARKING REQUIREMENTS Add S id e A- f th +.-,,,. +. Fe. Off street parking shall be required and determined per Chapter 10. Parking areas shall primarily be located to the rear or side of the proposed structures to minimize visibility of vehicles. '^;t PARKING LOT DESIGN Parking lots shall be designed to allow pedestrians to safely move from their vehicles to the buildings. This Fnay be he-uI,- channel "),,d ia . f.-,,... the eaF +„ the p +...-..f th .'At A paving material that is different in color and /or texture from that of vehicular areas shall delineate these pedestrian travel ways and shall be clearly marked. Small posts or bollards incorporating lights may also serve the same purpose. Parking lots shall be adequately screened from public view and shall include landscaping and buffering per Chapter 9 of the Cabarrus County Zoning Ordinance. LANDSCAPING A Landscaping plan shall be submitted in accordance with Chapter 9 of the Cabarrus County Zoning Ordinance. �R LIGHTING Lighting for all non - residential uses shall provide proper lighting for security purposes while not diminishing the quality of any surrounding residential uses. • All light fixtures (freestanding, flood, or any other form of light fixture) shall be provided with full cut -off fixtures, visors, or any other suitable directional control to direct light either downward or directly on the appropriate building. (Wall pack lighting is not permitted) • No light fixture shall create any glare or spillover lighting effects on any residential properties or streets. • Freestanding light fixtures along all public street systems and internal street systems shall not exceed nineteen feet in total mounted height and shall consist of a decorative fixture that shields the source of light away from neighboring properties. • Lighting located within parking lots may not exceed thirty -three feet in total mounted height. Parking lot lighting shall consist of a fixture that shields the source of light away from neighboring properties and direct the illumination to the ground's surface. • Lighting installations should include timers, dimmers, and /or sensors to reduce overall energy consumption and unnecessary lighting. • Lighting levels for canopies and awnings of commercial facilities shall be adequate only to facilitate the activities taking place in such locations and shall not be used to attract attention to the businesses. Lighting fixtures mounted on canopies shall be recessed so that the light's lens cover is recessed or flush with the bottom surface (ceiling) of the canopy and /or shielded by the fixture or the edge of the canopy so that light is restrained. Canopies shall be constructed of non - light- emitting material. LOADING /UNLOADING AREAS AND LOADING DOCKS Attachment number 4 \n G -4 Page 394