Laserfiche WebLink
• Outboard roll stop hinge (6 places) * light oil <br />• Outboard roll stop springs (3) * light oil <br />4 Weeks or 100 cycles <br />* Perform all procedures listed in previous section(s) also <br />• Transition plate hinge * light oil <br />• Platform fold axles <br />* light oil <br />• Handrail(s) pivot points (option) light oil <br />1 Year or 1250 Cycles <br />* Perform all procedures listed in previous section(s) also <br />❑ Inspect cotter pins on platform fold axles (2) Replace if needed <br />❑ Inspect gas spring mounting hardware Tighten or replace if needed <br />fl Inspect roll stop for proper operation. Roll <br />Replace defective parts <br />Stop must snap to vertical (UP) position. <br />And /or relubricate. <br />❑ Inspect platform locking channels <br />Resecure or replace <br />Mounting hardware for securement (8 <br />carriage bolts) <br />® Inspect handrail(s) for proper operation <br />Replace defective parts <br />And /or relubrlcate <br />❑ Hydraulic Fluid (Pump) — check level <br />Use Type A transmission <br />Fluid (* See Systems <br />Description for specifications <br />Check fluid level with <br />platform lowered fully. Fill <br />the reservoir to within 'l7" <br />from the top of the reservoir <br />(breather cap hole) <br />❑ Manual Back -up Pump (option) <br />Release valve must be tight. <br />Check for proper operation. <br />Tighten or replace leaky or <br />Faulty hydraulic fittings. <br />Check hydraulic fluid level. <br />( *See Systems Descriptions <br />for Priming and Flushing <br />Procedures). <br />12 <br />Attachment number 2 <br />F -5 Page 219 <br />