Laserfiche WebLink
Does your bid comply? Yes _X_ No <br />Horns <br />The OEM manufacturer's dual electric horns shall be provided. <br />Does your bid comply? Yes _X_ No <br />Instrument Console <br />In the vehicle's cab there shall be provided a control console for control of ambulance functions. It shall be <br />constructed to allow easy access to the specified gauges, controls and switches as required by these <br />specifications. This console shall be mounted between the drivers and passenger seats. It shall also contain 2 <br />large cup holders, and an approximately 6" space with a divider for maps etc. It shall not interfere with the <br />operation of any dash - mounted controls or passenger -side airbag. The console switch panel will incorporate <br />plug in switches and shall be connected to the master printed circuit board by a single cable with quick - <br />disconnect, computer -type plug -in connections, in order to minimize the number of electrical components and <br />connections. There shall be no electrical components for this console mounted in the vehicle dash. <br />Consoles mounted overhead are unacceptable since they require the driver to look away from the road. <br />Does your bid comply? Yes _X_ No <br />Instruments and Gauges <br />The vehicle shall be provided with the OEM chassis manufacturer's standard gauges and instruments in <br />addition to the above shall be supplied. In addition to those gauges the following shall be included in the <br />emergency front switch console and shall be digital: <br />1. Voltmeter (showing total voltage) <br />2. Ammeter (200 amp shunt type) <br />Does your bid comply? Yes _X_ No <br />21 <br />Attachment number 1 <br />F -2 Page 69 <br />