AG 2013 03 18 - Laserfiche WebLink

Home Browse Search

Mud Flaps In order to provide additional protection to designated areas of the chassis and module, the manufacturer shall provide heavy -duty rubber mud flaps securely attached behind the rear wheels. Does your bid comply? Yes _X_ No Running Boards The cab will be fitted with aluminum diamond plate running boards. The boards will be securely attached to the cab and module. They shall incorporate a Grip Strut type surface for improved foot traction. Does your bid comply? Yes _X_ No ELECTRICAL SYSTEMS AND COMPONENTS Electrical System The emergency medical vehicle's electrical system shall be equipped with, but not limited to the following: three 12 volt batteries, ignition, starting, generating, lighting, visual and audible warning systems; specified electronics equipment and devices to include control consoles located in the cab and patient compartment and other specified accessory wiring. The electrical systems and equipment shall comply with all applicable FMVSS including Federal Motor Carrier Safety Regulations (FMCSR), and shall also conform to all the applicable SAE recommended standards and practices whether or not specifically referenced in this document. Additionally, the electrical system shall meet the requirements of AMD Standard 005. All electrical and electronic components shall be selected to minimize electrical loads and levels of heat generated by those electrical components thereby not exceeding the vehicle's generating system capacity or diminish its ability to provide the required levels of electrical power. Electrical systems utilizing switching of "hot load" circuits for emergency and warning lighting shall not be accepted by the Purchaser. All electrical system components and wiring shall be readily accessible through access panels for checking and maintenance. The cab and patient compartment consoles shall also be constructed in such a way that the switches and gauges are easily serviced. They shall be accessible through service panels. These panels will be secured in the closed position in a positive manner, yet be easily opened for service. In order to provide optimal protection from weather, contaminants, and other potential hazards this electrical cabinet shall be located inside the module itself. Ambulances with the electrical cabinet accessible from outside of the module are not acceptable and are cause for rejection of the bid. 23 Attachment number 1 F -2 Page 71