AG 2013 08 19 - Laserfiche WebLink

Home Browse Search

and/or pretreatment process used by the Permittee, which has potential to impact the characteristics or volume of the discharge or the manner in which the discharge is regulated. (13) Identifies the specific date on which the proposed transfer is to occur; and (C) Acknowledges and accepts full responsibility for complying with all terms and provisions of the wastewater discharge permit to be transferred. Failure to comply fully with the provisions of this ordinance renders the wastewater discharge permit void as of the date of facility transfer. (d) Permit Reissuance A SIU shall apply for permit reissuance by submitting a complete permit application in accordance with Section 4.2 a minimum of 180 days prior to the expiration of the existing permit. SECTION 5 - REPORTING REQUIREMENTS 5.1 Vaseline Monitoring Reports (a) Within either- one hundred eighty (180) days after the effective date of a categorical pretreatment standard, or the final administrative decision on a category determination under 40 CFR 403.6(a)(4), whichever is later, existing industrial users who are subject to the standard and are currently discharging to or scheduled to discharge to the POTW shall submit to the Executive Director a report which contains the information listed in paragraph (b) below. At least ninety (90) days prior to commencement of their discharge, new sources, and sources that become categorical users subsequent to the promulgation of an applicable categorical standard, shall submit to the Executive Director a report which contains the information listed in paragraph (b) below. A new source shall report the method of pretreatment it intends to use to meet applicable categorical standards. A new source also shall give estimates of its anticipated flow and quantity of pollutants to be discharged. (b) Users described above shall submit to the Executive Director the information set forth below. (1) Identifying Information. The name and address of the facility, including the name of the operator and owner. (2) Environmental Permits. A list of any environmental control permits held by or for the facility. (3) Description of Operations. A brief description of the nature, average rate of production, and standard industrial classifications of the operation(s) carried out by such user. This description should include a schematic process diagram which indicates points of discharge to the POTW from the regulated processes. (4) Blow Measurement. Information showing the measured average daily and maximum daily flow, in gallons per day, to the POTW frorn regulated process streams and other streams, as necessary, to allow use of the combined waste stream formula set out in 40 CFR 443.6(e). (5) Measurement of Pollutants. 0) The categorical pretreatment standards applicable to each regulated process. (ii) The results of sampling and analysis identifying the nature and concentration, and /or mass, where required by the standard or by the Executive Director, of regulated pollutants in the 37 Attachment number 6 H -3 Page 292