BC 2011 10 17 Regular Meeting - Laserfiche WebLink

Home Browse Search

October 17, 2011 (Regular Meeting) Page 731 Enter 001 - 999. When the property has numerous floors, it is too time consuming to determine the total number of rooms for the entire structure. Therefore, investigate one or two stories to develop the approximate average. It would be advisable to check floors above the base floor as it usually contains a greater percentage of open area than the remainder of the floors. This field cannot be zero filled. ESTIMATED PERCENT COMMON WALL EST. PERCENT.... . OOR MOM WALT ..... If the structure shares a party wall_, enter to the nearest 5%, the total percentage of party wall shared by the improvement. NONSTANDARD WALL HEIGHT NONSTANDARD WALL HEIGHT - The height of the first floor wall should be entered to the closest foot. The program will determine if it is non- standard and mark appropriate adjustments. If the field is zero filled, the standard height for the particular model will be assumed. The following are considered to be the standard wall heights applicable to the system models: Model 03 8 feet Model 04 12 feet Model 05 8 feet Model 06 14 feet Model 07 12 feet Permit Data Building Permits CODE DATE NOTE PERMIT NUMBER AMOUNT DEL Select Code.. 4 Codes: C- Commercial N -New Construction R- Remodel 0 -Other BUILDING SKETCH CODING Gettina Started Guide Updated: 3/25/08 Screen Layout The most commonly used features are available on the screen without the need to select these features from drop -down menus. Grid: The grid area (or sketch pad), located in the center of the screen, is where the footprint of the building is drawn. Each square in the grid represents one square foot. ® Ribbon Menu: Commonly used tools are located in, the ribbon menu at the top of the screen. Shortcut Pad: Icons for shortcut features are located in the pad on the left of the screen. * Subarea: Areas and their square foot totals are displayed in the window pane on the .right side of the screen • Detail Areas: Displays each subarea and the associated square foot total. • Summary: Combines the like subareas and displays the square foot total of the areas of the same type. Status Bar: Located at the bottom of the screen, displays the up /down, left /right distance(s) needed to close the currently open area as well as the total square footage of the closed areas.