Laserfiche WebLink
October 17, 2011 (Regular Meeting) <br />Pa ge 715 <br />Special attention needs to be given multi -story buildings. A notation <br />to denote upper stories and /or basements should be as follows <br />- - -FLR = 2 <br />cczlaYl1 lS <br />- - -SSM = 1 <br />Further refinements of this situation are necessary to contend with many <br />older, odd shaped homes often with 2 or more stories. Careful attention must <br />be paid to auxiliary areas and whether or not they extend to all floors. <br />TOP HORIZONTAL LINES <br />(left to right) <br />WEST <br />11 + 19 + 21 = 51 <br />BOTTOM HORIZONTAL LINES <br />EAST <br />26 + 14 + 11 = 51 <br />LEFT VERTICAL LINES <br />(top to bottom) <br />SOUTH <br />10 + 39 = 49 <br />RIGHT VERTICAL LINES <br />NORTH <br />7 + 9 + 17 + 4 + 12 = 49 <br />11 + 19 + 21 = 51 <br />26 + 14 + 11 = 51 <br />7 <br />10 9 <br />39 17 <br />49 4 <br />12 <br />49 <br />In the above example the auxiliary areas, such as the screened porch (FSP) <br />will prevent actual measurement of some of the walls of the base. This is <br />overcome by recording the actual measurements of the perimeter and deriving <br />some of the base wall measurements from them. In this example, the length of <br />the rear wall of the base is determined by adding the length of the rear wall <br />of the screen porch (19) to that of the accessible rear wall of the base <br />(21) . <br />