Laserfiche WebLink
CROSSING RAILROAD TRACKS <br />To insure that everyone arrives safely at their destination, consistently utilize the following <br />procedures when approaching and crossing railroad tracks: <br />• Upon approaching the railroad crossing, proceed into the far right lane. <br />• Turn on the four -way flashers 100 feet before reaching the tracks the vehicle must stop <br />behind the white line (if a line is present) and not in the path of the crossing barrier. <br />• Turn off heaters, fans, radios, etc. so that you can hear a train. If necessary, ask passengers <br />to remain silent during the crossing. <br />• Open the door completely and listen for an approaching train or (if driving a van) open the <br />window completely and listen. <br />• Look in both track directions as you listen for an approaching train. <br />• When you can conclude that no train is approaching, close the door (watching the door <br />while it is closing) or window. <br />• Check your left mirror for traffic. <br />• Proceed slowly over the tracks to avoid damage to the vehicle. <br />• Turn off the four -way flashers after the vehicle is past the tracks. <br />04/25/16 PDFConvert. 1073 2. 1. Section 2_- _Driver Employee_Training Attachme14umber 2 \n <br />F -9 Page 208 <br />