AG 2013 03 18 - Laserfiche WebLink

Home Browse Search

Scene and loading lights shall be not less than 75 inches above the ground and unobstructed by open doors. There will be four (4) Whelen clear halogen scene lights located two (2) on the left side and two (2) on the right side of the ambulance body. The lights on the curbside shall come on when the curbside entry door is opened. They shall be firmly fastened as described above to the body surfaces below the roofline and centered between the red emergency lights. The two (2) rear load lights shall be Whelen clear halogen load lights. Switches for both the scene and load lights shall be located on the front switch control panel. Rear load lights shall illuminate the area surrounding the back loading door(s). Rear loading lights shall automatically be activated when the vehicle is shifted into reverse gear or when the rear doors are opened, but may be turned off with an override switch on the front switch console. All scene and load lights shall have chrome bezels. Does your bid comply? Yes _X_ No Interior lighting The basic interior ambulance lighting configuration shall be designed to minimize electrical loads and include: A driver's compartment OEM dome light, instrument panel lights, master switch panel and console light(s). Lighting shall be designed and located so that no glare is reflected into the driver's eyes or his line of vision from switch control panels or other areas that are illuminated while the vehicle is in motion. Does your bid comply? Yes _X_ No Patient Compartment Liehtine The patient compartment shall be provided with six (6) overhead dual- intensity ceiling lights. There shall be three (3) lights located over the "primary" patient area and three (3) over the squad bench. These lights shall be recessed in the patient compartment headliner and not protrude more than 1.5 inches. The supplied lights shall have "dual- element" bulbs for two (2) levels of illumination. The technician shall be able to control these lighting levels from switches on the switch control panel through the electronic control module. These dual levels shall work together or differ from side to side. This "dual" light level shall not be provided by the use of a rheostat, but by low voltage, full size easy -to -use rocker switches located on the rear switch control panel. When the curbside or right rear entry doors are opened, the three (3) lights over the squad bench shall light automatically in the low intensity mode. The lights over the primary cot shall not light to conserve power. In addition to the overhead lighting, there shall be provided an 18" bar light in the technician's work or "action" area. A switch on the rear console shall control the action area light. 36 Attachment number 1 F -2 Page 84