Laserfiche WebLink
individual unit, no common walls between compartments including the patient compartment will be allowed <br />All compartment joints must be sealed after MIG or TIG welding. <br />Each compartment shall be vented with a minimum of one (1) exhaust vent to aid in closing the doors. The <br />vents shall have "one way" valves to allow free flow of air when the doors are being closed but minimize entry <br />of dust, moisture, or other contaminants. <br />Does your bid comply? Yes _X_ No <br />Matte -Flex Protection <br />All exterior compartment floors and shelves will be covered with Matte -flex grated material to protect <br />equipment and prevent premature wear and tear on either the floor or equipment stored within. <br />Does your bid comply? Yes _X_ No <br />Compartment Shelving <br />Outside compartment shall have the following minimum requirements: <br />(A). All shelving to be fabricated from .125" diamond -plate with retainer lips of 1" in height showing diamond - <br />plate on exposed surface. <br />(6). Shelving shall be supported by four (4) heavy duty angle brackets attached to four (4) full height formed <br />vertical channel tracks (2 per side). Interior flanges of channel bracket to be serrated to insure positive locking <br />of shelf position and prevent shakedown of shelving during transit under heavy loads. Shelves will be <br />positioned as follows: <br />(C). Easy adjustment of shelf position to be accomplished by loosening four (4) bolts. <br />Does your bid comply with lines "A" through "C? <br />Yes _X_ No <br />Compartment Configuration <br />46 <br />Attachment number 1 <br />F -2 Page 94 <br />