Laserfiche WebLink
(D). The CPR Seat shall have one (1) lid with a gas strut hold open device. <br />(E). There shall be one (1) set of seat belts, with automotive -style retractors. <br />(F). There shall be storage area beneath the seat, this shall be painted to match the interior of the patient <br />module. <br />Does your bid comply? Yes _X_ No <br />Shelving and other miscellaneous items <br />Where specified in the drawings with this specification there shall be adjustable shelves in the cabinets. These <br />shelves shall be bolted to heavy -duty infinitely adjustable strut type shelf track. The shelves shall be of .125 - <br />inch aluminum coated on all surfaces and edges with the same color coordinated, painted finish as the interior <br />of the cabinet. The shelf of the cabinet will be lined with a heavy -duty rubber material. This material will be <br />removable for cleaning. Cabinet latches, where specified, shall be Southco black plastic flush mounting slam <br />type latches. At least one compartment shall have a locking latch. The Purchaser shall choose the color <br />scheme from samples supplied by the successful Bidder. Honeycomb, fiberglass, plywood, plastic, thinner <br />aluminum, or particleboard cabinet construction shall be unacceptable. Cabinet or interior walls may not be <br />finished using Formica type laminate material. These cabinets shall be firmly anchored (bolted) to the tapping <br />plates found in the ambulance structure with #10 x 24 screws that are pre- dipped with Locktite and fitted with <br />a metal /rubber washers which are vulcanized together to suppress vibration. <br />The lower 13" of the street side wall cabinets from the CPR seat down shall be protected with a single, non <br />spliced heavy -duty stainless steel kick panel running from the front wall to the rear of the cabinet wall. <br />Screws, bolts, or rivets shall not be used to attach the stainless steel, in order to maintain an attractive and <br />easy to clean surface. The kick panel will include a %" return at the base rounding the lower edge of the kick <br />plate in a return to the recess toe kick. <br />The lower 13" of the face of the squad bench on the aisle side shall be protected with a heavy -duty single non <br />spliced stainless steel kick plate, while the front end shall be covered in its entirety with the same material. <br />The stainless steel shall be attached as noted for the street side panel. <br />Does your bid comply? Yes _X_ No <br />54 <br />Attachment number 1 <br />F -2 Page 102 <br />