Laserfiche WebLink
2.14 Fuel Tank <br />The vehicle shall be equipped with a single fuel tank, having a capacity of at least 57 g lions. <br />Does your bid comply? Yes No_ <br />2.15 Tires, Rims and Wheel Covers <br />The vehicle shall be equipped with LT225/75Rx 16E radial black sidewall tires. The OEM <br />manufacturer's standard steel vented rims will be provided. The four exposed wheels shall be <br />factory painted (gray) to match the chassis cab and provide an easy to clean exterior surface. <br />Spare tire, wheel and tire changing tools will also be provided. Chevrolet wheel covers shall be <br />installed. Rear wheel covers shall include valve extensions to inner wheels. <br />Does your bid comply? Yes_ZNo <br />2.16 Transmission <br />The vehicle shall be equipped with a Allison 4 -speed automatic transmission and heavy -duty <br />transmission with oil cooler. <br />Does your bid comply? Yes V_No <br />2.17 Air Conditioning and Heater <br />The vehicle shall be equipped with factory air conditioning with heavy -duty cooling package and <br />heavy -duty radiator. The heater shall be the manufacturer's standard with cut -off valves <br />accessible and marked. <br />Does your bid comply? Yes___�,/No <br />2.18 Auxiliary Heater -A/C Connector Package <br />The chassis shall be equipped with the Chevrolet Auxiliary Heater -A/C connector pac age ENC. <br />Does your bid comply? Yes--,,/ No <br />2.19 Glass <br />The chassis shall be equipped with the chassis manufacturer's standard tinted glass supplied as <br />part of their Air Conditioning Cooling Package. The glass provided shall meet all the <br />requirements of KKK- A -1822E and those of the Federal Motor Vehicle Safety Standards. <br />Does your bid comply? Yes ,/ No <br />2.20 Horns <br />The OEM manufacturer's dual electric horns shall be provided. <br />Does your bid comply? Yes V <br />2.21 Instrument Console <br />In the vehicle's cab there shall be provided a control console. It shall be constructed to allow <br />easy access to the specified gauges, controls and switches as required by these specifications. <br />This console shall be mounted on the front engine cover to the driver's right side. It shall not <br />interfere with the operation of any dash - mounted controls or passenger -side airbag. The console <br />shall be connected to the master printed circuit board by a single cable with quick- disconnect, <br />computer -type plug -in connections. There shall be storage for (4) four glove boxes, radios, maps <br />and cup holders built in to this custom console. Final design shall be done at a pre build <br />conference to be held at Rockingham County EMS. The console shall be constructed of .125 <br />smooth aluminum and be Powder Coated, silver vein ( Dark Gray) in color. As a minimum, 2 <br />cup holders, 2 map pockets, 4 Glove boxes and radio storage shall be provided in this console. <br />Consoles mounted overhead are unacceptable since they require the driver to look away from the <br />road. NO EXCEPTIONS / <br />Does your bid comply? Yes <br />10 <br />Attachment number 1 <br />F -5 Page 107 <br />