AG 2012 02 20 - Laserfiche WebLink

Home Browse Search

area surrounding the back loading door(s). Rear loading lights shall automatically be activated when the vehicle is shifted into reverse gear or when the rear doors are opened, but may be turned off with a switch on the front switch console. In addition, the (2) Two Passenger side scene lights shall be activated by opening the side module door. Does your bid comply? Yes No 4.7 Vehicle Interior Lighting The basic interior ambulance lighting configuration shall be designed to minimize electrical loads and include: A driver's compartment dome light, instrument panel lights, master switch panel and console light(s). Lighting shall be designed and located so that no glare is reflected into the driver's eyes or his line of vision from switch control panels or other areas that are illuminated while the vehicle is in motion. Does your bid comply? YesNo 4.8 Patient Compartment Illumination The patient compartment shall be provided with eight (8) overhead LED lights. There shall be four (4) lights located over the "primary" patient area and four (4) over the squad bench. These lights shall be recessed in the patient compartment headliner and not protrude more than 1.5 inches. The supplied lights shall have "dual- element" bulbs for two (2) levels of illumination. The technician shall be able to control these lighting levels from switches on the switch control panel through the electronic control module. These dual levels shall work together or differ from side to side. This "dual" light level shall not be provided by the use of a rheostat, but by low voltage, full size easy -to -use rocker switches located on the rear switch control panel. Lights are to operate when either the curbside or rear doors are opened, the four (4) lights over the squad bench shall light automatically in the low intensity mode. To conserve power, the lights over the primary cot shall not light. Does your bid comply? Yes No Any system using rheostat - controlled lighting shall be unacceptable and shall not be considered. An independent testing laboratory shall provide certifications that the required patient compartment illumination is provided. In addition to the overhead lighting, there shall be provided a 12" bar light in the technician's work or "action" area. A switch on the rear console shall control the action area light. There shall be provided a step -well light for the curbside and rear entry doors. When either the curbside or rear doors are opened, the step -well lights shall be automatically lighted. Does your bid comply? Yes No 5.0 VEHICLE BODY AND PATIENT AREA 5.1 Body, General Construction It is the intention of these specifications to require that the all aluminum ambulance modular body be designed and fabricated to provide the safest possible surroundings while offering the greatest available payload capability in an affordable, state of the art environment. No rivets, screws, or other metal fasteners shall be used for the attachment of any exterior body panel to a structural member. In addition, Modular Box shall be constructed, in house, wholly by the Ambulance Manufacturer. No Exception. Does your bid comply? Yes No 20 Attachment number 1 F -5 Page 117