AG 2012 02 20 - Laserfiche WebLink

Home Browse Search

Where specified there shall be adjustable shelves in the cabinets. These shelves shall be bolted to heavy -duty infinitely adjustable shelf track by aluminum angle brackets. The cabinets shall be of .75 -inch exterior grade plywood, glued, screwed and stapled together, and shall be covered on all surfaces and edges with plastic laminate. Cabinet latches, where specified, shall be Hartwell positive closure latches. The use of slam- action type paddle latches, except on the squad bench, is not acceptable. At least one compartment shall have a locking latch. This agency shall choose the color scheme from samples supplied by the successful Bidder. Fiberglass, metal, plastic or particleboard cabinet construction shall be unacceptable. These cabinets shall be firmly anchored (bolted) to the tapping plates found in the ambulance structure. Does your bid comply? YesNo The technician's work or "action" area shall be of the size shown in the drawings. A Gemstone countertop shall be installed for both action areas. (Corian Style shall be acceptable). See drawings for locations. Does your bid comply? Yes 1/ No 6.5 Squad Bench The squad bench shall be constructed of .75" exterior grade plywood and covered with laminated plastic. The squad bench shall have a padded seat cushion covered with heavy -duty thermal - formed vinyl. This cushion shall be a minimum of 3 inches thick. The cushion shall provide a smooth surface for ease of cleaning and disinfecting. (Note: "Hot Press" type pleating is also unacceptable.) Located between to side entry step well and the squad bench shall be a full height "safety net ". The squad bench shall have a full height and length stainless steel face, there shall also be a matching stainless steel face located on the left wall. /" Does your bid comply? Yes �/ No The squad bench lid is to be split with at least two (2) pieces openable, with automatic hold open devices. The squad bench is to have a full - length backrest covered with matching heavy - duty thermal- formed vinyl. Does your bid comply? Yes—../ There shall be three (3) sets of seat belts, with automotive -style retractors, on the bench so as to secure three persons seated or one patient on the secondary litter. Does your bid comply? Yes— N o There shall be a storage area beneath the seat, lined with laminate and capable of storing a scoop stretcher, backboards, traction splints, etc. All squad bench corners shall have aluminum plates installed so as to prevent damage when loading or removing cots and equipment. These protection plates shall be anodized aluminum. Does your bid comply? Yes No 6.6 Technician Seat The technician seat shall be mounted on the partition bulkhead positioned so that the technician, when seated, is located at the head of the primary cot facing the patient. There shall be a minimum of 25 inches and a maximum of 30 inches clearance at floor level between the head of the cot and the technician seat backrest. Seat shall be an automotive style, high- backed, heavy - duty vinyl chair with fore and aft track adjustment mounted on a swivel Attaca%nt number 1 F -5 Page 127