AG 2007 03 26 - Laserfiche WebLink

Home Browse Search

TASK 8 -MISCELLANEOUS Under this task CDM will provide the following miscellaneous services: 1) Survey Coordination. Provide Concord Surveying (CESI) with a scope of work and digital file of the planned closure area showing the approximate limits of waste. 2) Preliminary meeting with NCDENR Solid Waste Section to discuss permitable design options, permeability requirements for the closure cap and alternate gas collection system design in lieu of vertical gas wells installed in the waste. 3) Review Permits and previous Transition Plans to compare the current CESI survey with permitted fill contours to determine whether areas have been either over filled or under filled and whether reshaping of the existing C&D Landfill will be necessary. CDM will prepare a Cadd generated plan comparing permitted versus existing fill contours with point comparisons on a 50-foot grid showing the difference in elevation + or -from the permitted fill contours, If needed, CDM along with representative(s) of Cabarrus County, will meet with the Solid Waste Section to discuss any deviations from the original permit. Meeting(s), if required, are not included under this task. 2. The responsibility of OWNER as described in Section 4 of said Agreement are amended and supplemented as follows: • Review project deliverables in a timely manner. • Provide all required survey associated with the project. • County to determine waste limits for closure by conducting a waste limits investigation 3, The time period for the performance of ENGINEER'S services as set forth in Section 4 of said Agreement are amended as follows: • CDM will begin Tasks 2, 3 and 4 within 2 weeks of receiving authorization to proceed. 4. The method of payment for services rendered by ENGINEER shall be as set forth below: For the Basic Services performed by the ENGINEER under Section 1 of this Amendment, OWNER agrees to pay ENGINEER the lump sum fee of 109 750 which is broken down as follows. ENGINEER shall be entitled to monthly payments based on work completed. TASK - Task 1-Project Coordination Task 2 -Notice of Intent of Closure Task 3 -Draft Design Documents Task 4 -Gas Collection/Venting System Design Task 5 -Design Review Meetings Task 6 -Final Design Documents Task 7 -Bidding Services Task 8 -Miscellaneous a) Survey Coordination b) Preliminary Design Review Meeting w/SWS c) Permit Review Total CDM $ 3,000 $ 3,950 $ 25,000 $ 30,000 $ 2,500 $ 25,000 $ 15,000 $ 1,500 $ 850 2 950 $ 109,750 Page 6 of 7 I~' - ~