|
execution guaranteed by a good and sufficient surety or performance bond (see
<br />Sc~ion 65 !00 Chapter 4, Section 15) with corporate surety, a copy of which shall
<br />be filed with the PI,, .... ,,,~ ~- r~i.~.. - · ·
<br /> ~,. ,_,~ .... ,~ ~.,,,.~,~,, Subdivision Administrator.
<br />
<br />Specifications for Final Plat:
<br />
<br />The Title Block - shall contain the following information: subdivision name,
<br />property designation, name(s) and address(es) of owner(s), township,
<br />county, state, the date(s) the survey was made, name and date of
<br />Preliminary Plat approval, scale in feet per inch in words or figures and bar
<br />graph, and the name, seal, address, and phone number of the surveyor.
<br />The Title Block shall be located on the bottom right hand corner of the plat.
<br />
<br />Monuments and Control Corners - the accurate location, material, and size
<br />of monuments and the designation of specific control corners in
<br />conformance with G.S. 39-32 as amended shall be shown.
<br />
<br />Boundaries and Uses - the exact boundary of the tract of land being
<br />subdivided in heavy lines; including full dimensions by lengths and bearings.
<br />The plat shall clearly show the disposition of all portions of the tract into
<br />designated lots, roads, alleys, parks, floodplains, and open space and the
<br />name(s) or owner(s) of record of adjoining parcels of unsubdivided land and
<br />present zoning.
<br />
<br />Acreage - each plat shall show the total acreage of the areas being
<br />recorded along with the area of each lot. Area of land parcels must show
<br />the method of computation used by the surveyor, and county parcel
<br />identification numbers.
<br />
<br />Sufficient Data - to determine readily and reproduce accurately on the
<br />ground the location, bearing, and length of every street line, lot line,
<br />easement line, block line, building line whether straight or curved. This
<br />data shall include tangent distance, the central angle, the radius, arcs and
<br />chords of all curves. All linear dimensions shall be given in feet and
<br />hundredths thereof and angular dimensions shall be of comparable accuracy
<br />within the limits of good surveying practices.
<br />
<br />]:f the Final Plat is Drawn in Two or More Sections - each section shall be
<br />accompanied by a key map showing the location of the sections, match
<br />lines shall be shown and labeled, and maps shall have reference to each
<br />other (i.e. map :[ of 2, map 2 of 2, etc.).
<br />
<br />191,
<br />
<br />
<br />
|