AG 1997 08 12 - Laserfiche WebLink

Home Browse Search

OUTLET: FRENCH FLY CROTCH: BELT LOOPS: SEAMING: BARTACKS: BOTTOMS: BRAID: LABELS: The trousers are to be made with a waistband outlet allowing a minimum of 2" for easy alteration Closed with a #42 talon brass zipper with a locking slider and a matching tape (must match pants material). The zipper to be full 3/4" under the opening. Crotch is to be lined front and back (four quarter) with a single thickness of the ~me matching twill having a pinked outer edge. To be 2-1/2" high and 1-1/4" wide. Double thickness of self goods with the edges butted at the back. A minimum of seven (7) dependent on waist size. All loops are to be inserted into both the top and bottom waistband seam with the exception of the center back loop. No belt loop on right or left side seam -- loops on both sides to be adjusted for holster. The entire trouser is to be seamed with polyester core thread and the seat seam shall be stitched with tandem double-needle seat seaming machine. All exposed inside seams of the trousers are to be serge& Triangular bartacks are to be placed at each end of the hip pockets, straight bartacks at the bottom of the side pockets. These bartacks are to be made on a bartack machine having 32 fini~ed length stitches with side to be 1/2" long. Eighteen (18) of these stitches are to be straight lock stitches and fourteen (14) are to be zigzag covering stitches. All other points of strain are to be secured with a bartack. All bottomg to be plain with a minimum of Y' turn under. To be finished with a blind stitch felling machine. Stitched through bottoms will not be acceptable. Width of bottom of trousers to be standard as to size of trousers. Material to be 100% polyester brown gabardine. Braid to be made into the side seam with 1" exposed and to extend to bottom of waistband. Waist size labels sewn inside trousers. 5