Laserfiche WebLink
Does your bid comply? Yes _X_ No <br />Cab -to -body attachment -Type III <br />The body shall be attached to the cab using a minimum of twenty -four (24) .250" x 20 zinc treated steel bolts, <br />fender washers and nylon lock nuts. A one -piece automotive style closed cell bulb seal shall be installed <br />between the cab and body to completely seal the joint between the cab and the modular body. The body shall <br />be primed and painted prior to the cab & chassis being attached to provide maximum protection against <br />electrolysis. <br />The body shall be primed and painted prior to the cab & chassis being attached to provide maximum <br />protection against electrolysis. <br />Does your bid comply? Yes _X_ No <br />Cab -to -body attachment -Type I <br />The cab shall be provided with a steel box frame extended roof covered with 10 ga. steel plate, primed and <br />painted to match the cab roof. The front wall of the module body shall be provided with a bellows mount <br />"walk through" opening to allow walk -thru access from the cab to the module body. This bellows shall be of a <br />rubber type material, heavy duty, with properties allowing it to remain flexible under cold weather conditions, <br />attached securely and sealed in a manner to prevent water, dirt, or air leakage. <br />There shall be, on the inside of the ambulance, an attractive, audio and thermally insulated cover attached to <br />cover the bellows. <br />There shall be provided a door with a fixed Plexiglas window with approximate dimensions of the door being <br />18" wide x 50" high. <br />Does your bid comply? Yes _X_ No <br />Module Side Entry Door <br />The modular body shall be provided with one (1) entry door on the curbside of the module. A forward hinged <br />single door shall provide an opening of 76 inches high by 32 inches wide, and swing out to 100 degrees for <br />41 <br />Attachment number 1 <br />F -2 Page 89 <br />