Laserfiche WebLink
clear access. This door shall be fitted with a Suspa, or equivalent, dual action gas strut hold open device. The <br />attachment of the push rod to the door shall be accomplished by bolting into rivet -nuts secured in the <br />extruded frame of the door with stainless steel screws. The door shall be attached using a 2.5" wide, full <br />length slotted stainless steel piano hinge with a .250" diameter hinge pin. The hinge must be slotted in order <br />to provide for field adjustment. Door openings narrower than specified are in violation of KKK1822F <br />specifications which require this dimension to allow for a restrained patient supine on a stretcher to be <br />removed in the event the rear doors are not available in an emergency situation. <br />There shall be a glove box holder built in above the side entry door, with spaces for 3 boxes of gloves. <br />Does your bid comply? Yes _X_ No <br />Module Rear Entry Doors <br />The modular body shall be provided with two (2) entry doors on the rear of the module. They shall cover a <br />clear opening of not less than 57 inches high by 48 inches wide. The doors shall be attached using a 2.5" wide, <br />full - length slotted stainless steel piano hinge with a .250" hinge pin. The hinge must be slotted to allow field <br />adjustment. Hold opens for these doors shall be Cast Products "Grabber" type located on the exterior of each <br />door with mating receptacle on the rear of the module body. The grabber hold opens shall be mounted using <br />bolts and rivet -nuts; for safety reasons sheet metal screw attachment is not acceptable. <br />Does your bid comply? Yes _X_ No <br />Module Entry Door Windows <br />(A). There shall be one 19 "H x 18 "W upper window in each module entry door. The windows shall be <br />aluminum framed and the glass will be bronze tinted safety glass. The curbside door shall have a sliding glass <br />window with a screen. The rear door windows shall be fixed to prevent exhaust gases from entering the <br />vehicle. Windows which open on the rear of the unit are unacceptable because of the negative pressure <br />created behind a moving vehicle. These windows shall have a bronze privacy tint. <br />Does your bid comply? Yes _X_ No <br />42 <br />Attachment number 1 <br />F -2 Page 90 <br />