Laserfiche WebLink
<br />Monday September 20, 2004 <br /> <br />elements listed below. These design elements are for consideration in the design of a Planned Unit <br />Development and shall be considered as criteria for approval. This is not to state that all of the design <br />elements listed below shall be included in a PUD, rather all elements shall be considered and those that are <br />considered appropriate and reasonable should be included. <br /> <br />. <br /> <br />Architectural elements <br />Building height, rhythm, articulation, massing and bulk are compatible with the individual site attributes <br />and are compatible with the surrounding neighborhoods. <br />Distinctive architectural details such as covered front entries, covered ftont porches, door and window <br />details, roof overhangs, and/or parapet walls with cap features should be provided on each dwelling, or <br />principle structure. A variety of roofing colors, textures, and component shapes including shake shingle, <br />shale, and wood compositions, should be provided. <br />Significant architectural differences in the choice of elevations, roof lines, and exterior colors for each <br />residential floor plan should be provided Not more than three (3) adjacent homes should contain the same <br />front facade, and not more than three (3) adjacent homes should contain the same rear facade visible from <br />arterial street view, on any block front. Homes facing one another (across the street) should not have the <br />same facade. No adjacent home should contain the same elevation. <br />Residential design guidelines are provided, which include a variety of conceptual standard plans, and may <br />include: variation in building setbacks, detached garages, recessed garages if attached to the principal <br />building and fencing alternatives. <br />Garage fronts should be de-emphasized and not be the most prominent architectural feature of the house. <br />This should be accomplished by providing side access garages, detached "in-line" garages, and/or L- <br />shaped floor plans on not less than fifty percent (50%) of the lots. Garages should be recessed at least one <br />car length in order to provide interest and relief from the street. The front elevation should prominently <br />feature an entrance for persons rather than automobiles with the garage area not to exceed forty percent <br />(40%) of the front facades of two story houses and 45% of single story houses. <br /> <br />. <br /> <br />. <br /> <br />. <br /> <br />. <br /> <br />. <br /> <br />Recreation elements <br />Not less than 20 percent (20%) of the residential units in medimn and high density areas are located within <br />660 feet of a pedestrian, equestrian and bicycle trail. <br />Recreation and open space facilities should be aligned with the connnunity parks and open space network, <br />as provided in any locally adopted land use plans or parks and recreation master plans. <br />Neighborhood scale recreation facilities and amenities should be provided which are functional, not <br />retention/detention or basin-like in design. Retention basins used in conjunction with recreational facilities <br />or amenities should be designed in accordance with the Storm water Management Standards of this <br />Ordinance. Such areas should include turf or landscaping within all areas not permanently covered with <br />standing water. <br />Gateway treatments may be incorporated at appropriate locations along an open space network. <br /> <br />. <br /> <br />. <br /> <br />. <br /> <br />. <br /> <br />Transportation elements <br />Park-and-ride lots may be incorporated with planned facilities. <br />Bicycle lanes should be included along at least fifty percent (50%) of the linear frontage of all planned <br />collector streets. <br />Bicycle parking facilities should be provided for all uses except single family detached and duplex <br />residences. <br />A customized entrance may be provided at the entry street intersecting a thoroughfare or collector which <br />features a waterfall, sculpture, monument signage, special landscaping, specialty pavement, enhanced <br />fence wall details, boulevard median or other similar treatment. <br /> <br />. <br /> <br />. <br /> <br />. <br /> <br />. <br /> <br />Landscaping and Buffering elements <br />Higher density or intensity developments abutting lower density or intensity areas may utilize transitional <br />stepping of intensities of uses or lot dimensions rather than strict buffering provided that these features <br />substantially mitigate any negative impacts consistent with the intent of this ordinance. These elements <br />will be defined on the initial preliminary site plan and will become binding once approved. <br />Landscaping within the PUD district and along its boundary shall be defined on the initial preliminary site <br />plan and will become binding once approved. Street trees, landscaped benns, and planted medians are <br /> <br />. <br /> <br />G--~ <br />