Laserfiche WebLink
Task 5 - Submittal to the Solid Waste Section <br /> <br />Upon approval of the closure plan by Cabarms County, CDM will subnrfit'th~ closure plan to the <br />Solid Waste Section for approval. CDM will respond to comments that co~respond to the work <br />submitted. Because the Solid Waste rules and policies are changing constantly, it is recognized <br />that additional work outside the scope of this amendment may be required to address Section <br />comments. If this is the case, an additional amendment may be required to address out-of-scope <br />comments. <br /> <br />Task 6 - Assistance with Implementation of the Closure Plan <br /> <br />CDM will meet with County staff prior to beginning to closure activities to review the closure <br />plan. CDM will meet with County staff once during implementation of the plan to review <br />progress. <br /> <br />Task 7 - Closure Certification <br /> <br />The North Carolina Solid Waste Management Rules require that written notification and <br />certification by the owner that the facility complies with the closure conditions; including <br />certification by a registered professional engineer licensed in North Carolina that adequate testing <br />has been determined that the f'mal cover requirements have been met, be submitted. The rules <br />also require certification by a representative of the Solid Waste Section. <br /> <br />CDM will review the conditions of the permit and closure plan, and inspect the inactive old fill <br />area to confh'm that the area has been closed in accordance with the permit conditions when the <br />County completes work. As required under Section .0510(a)(2) CDM will, on behalf of the <br />County advance up to five borings into the cover to determine that the cover meets the two-foot <br />thickness requirements of Rule .0505(3)(c). Prior to this field work, CDM will discuss the <br />locations of the borings with the Solid Waste Section and coordinate the activity with the Section <br />to facilitate inspection requirements. <br /> <br />CDM will prepare and submit the closure certification report to the Solid Waste Section for <br />approval. <br /> <br />CLOSURE PLAN AND IMPLEMENTATION ASSISTANCE FOR THE RECENTLY COMPLETED <br />AREA <br /> <br />Task 8 - Prepare Closure Plan for the Recently Completed Area <br /> <br />The recently completed area of the landfrll stopped receiving wastes between October 9, 1991 and <br />October 9, 1993, and therefore if falls under closure Catego~ 2. A closure plan must be <br />developed for this area to include conditions of Rule .0510, conditions of the permit, and comply <br />with cap requirements. The scope of work for this effort will be similar to that described above <br />for the old fall area. <br /> <br />n.~.abarmsXam cad3 -1.cab <br /> <br />Page 4 of 7 <br /> <br /> <br />